Digital Antenna Setup Sharp Aquos

1. Digital Antenna Setup Sharp Aquos Wireless

24CH SetupIf initial setup does not memorize all the channels in your region, follow the instructions below to manually memorize the channels.Air/Cable: Make sure what kind of connection is madewith your TV when selecting 'Air' or 'Cable'.CH Search: Channel auto search makes the TV look forall channels viewable in the set area.CH Memory: You can select the channels to skip in eachANALOG (Air), ANALOG (Cable), DIGITAL (Air) and DIGITAL (Cable).On: Skips channels. (Channel selection disabled using CHr/s.)Off: Does not skip channels. (Channel selection enabled usingCHr/s.)Remove Scrambled CH: This function makes the TVlook for and then delete digital cable channels that are scrambled and so unavailable in the set area.

The process may take more than 20 minutes.Yes: Starts to remove scrambled channels.No: This function does not work.See 'Initial Setup' on page 14 for setting each item. If no channel is found, confi rm the type of connection made with your TV and try channel search again. If you select 'Analog Search Start' and initiate the channel search, the CH Memory for Cable Digital will be deleted.Antenna Setup-DIGITALIn order to receive digital air broadcasts, you need a digital broadcast antenna. You can confi rm the antenna confi guration through the 'Antenna Setup- DIGITAL' screen.

If necessary, adjust the direction of the antenna to obtain the maximum signal strength.Signal Strength: The signal strength of DIGITAL channelis displayed. The signal information is based on the current channel.Channel Strength: Input the 2-digit channel numberto check the signal strength of the selected channel. Make sure the signal is strong enough for each channel.This function is available for DIGITAL (Air) only.Input SkipThis setting allows you to skip the HDMI or PC-IN Input ('Input 4 (PC)', 'Input 5 (HDMI)', 'Input 6 (HDMI)', 'Input 7 (HDMI)', 'Input 8 (HDMI)' and 'Input 9 (HDMI)') on the Input Selection operation.Yes: Skips the input. No: Does not skip input.Input LabelLets you set the input terminal displayed when using the INPUT SOURCE menu or channel display. Press a/b/c/d to select the new name for the input mode.You cannot change labels if the INPUT SOURCE is TV.Input Signal (for Analog PC Input Mode Only)Some input signals may have to be registered manually to display properly. The pair of input signals (resolutions) in the list below is not distinguishable when received. In such a case, you have to set the correct signal manually.

After setting once, it will display when the same signal (resolution) is input again.1024 x 7681360 x 768You can only select the 'Input Signal' on the Setup menu when receiving one of the 2 input signals listed above.Auto Sync. (for Analog PC Input Mode Only)For automatically adjusting the PC image.Yes: Auto Sync. Starts and 'Now adjusting the image.' Displays.No: This function does not work.When Auto Sync.

Digital Antenna Setup Sharp Aquos Wireless

Is successful, 'Completed' displays. If not, Auto Sync. May fail even if 'Completed' displays. May fail if the computer image has low resolution, has unclear (black) edges, or is moved while executing Auto Sync. Be sure to connect the PC to the TV and switch it on before starting Auto Sync.Fine Sync.Ordinarily you can easily adjust the picture as necessary to change image position using Auto Sync.

In some cases, however, manual adjustment is needed to optimize the image.H-Pos.: Centers the image by moving it to the left orright.V-Pos.: Centers the image by moving it up or down. Clock: Adjust when the image fl ickers with verticalstripes.Phase: Adjust when characters have low contrast orwhen the image fl ickers.For resetting all Fine Sync. Adjustment items to the factory preset values, pressa/b to select 'Reset', and then pressENTER. It is not necessary to adjust the 'Clock' or 'Phase' when a digital signal is being input, so it cannot be selected. The default cursor position may not be in the center, because the screen position variable ranges may be asymmetrical. The screen position variable ranges depend on the View Mode or the signal type.

The ranges can be seen on the position-setting screen.On-Screen Display Menu.

You can find anything you want on the internet. If you hadprovided the Model Number of your television, we could have helpedyou by googling your TV's model number, etc.Therefore, we have to be more general. Generally, the answerdepends on one thing - does the TV have a DTV digital televisiontuner. It is possible that an older LCD television has only ananalog tuner, which would make it the same as an old, traditionalTV except for the TV screen.The manual might say 'Digital Ready,' which is a marketing termused by such old LCD televisions. Un-abbreviated, Digital Readymeans that you have to add a DTV tuner. At the time these TVs weremade, there were no DTV tuners, so you were preparing for thefuture.Today, yesterday's future is now.

The $40 government coupons canbe put towards a digital TV set-top box that is a digital TV tuner.All convert the digital signals from an antenna to analog outputson Channel 3 or 4, which you can connect to your TV with a coaxcable, and then tune your TV to Channel 3 or 4.The $40 to $60 set-top boxes take a perfectly high-resolutiondigital TV signal, and convert it to an old fashioned, mundaneanalog TV signal. Boxes in this price range (and all that arecovered by the coupon) do NOT offer a digital output, which wouldoffer advantages like improved clarity and higher resolution (moreand finer lines that compose the picture).If that were my situation, I would find out the maximumresolution my digital-ready TV were capable of displaying (such as720 or 1080 lines) and I would make sure I got a set-top box whoseoutput to the television numerically matches the TVsresolution. That will mean something NOT covered by the couponprogram, and much more costly. If you want to watch digital TV isall its glory, it will be worth it.Newer LCD TVs that include internal digital tuners will havemanuals that mention 'Tuner: NTSC, ATSC, QAM.' These are true DTVsDigital Televisions.Interpretation: NTSC is old-fashioned analog; ATSC is the new,free, over-the-air-to-your-antenna digital broadcasts, and QAM isan unscrambled Cable-TV signal.Regarding QAM, you would only be able to take advantage of theQAM capabilities of a digital television if you have Cable TVservice. In that case, you might stick the Cable into your digitaltelevision, and see if your Cable TV company is delivering anyunscrambled QAM signals that a digital TV can receive, direct offthe cable without a Cable TV box.However, for the purposes of this conversation, your questionabout digital broadcasts, we're mostly intereseted in ATSC.If your television's manual says your television has a DTVtuner, then all you have to do is figure out how to switch your TVfrom its Analog tuner to its Digital tuner.

That will be just a fewclicks of the remote control to switch to the Digital tuner, andthen another couple of clicks to get your TV to 'search' fordigital TV signals perhaps called 'Autotune' - where the TV goesthrough the whole TV band and 'saves' digital TV channels that itdetects. When the search procedure is completed, you can just hitthe Channel Up or Channel Down buttons to scroll through the savedchannel.